AC installation in Tbilisi
4 Reasons to Choose CityHandyman for AC Installation in Tbilisi
The technician vacuums the line on every AC installation
Air and moisture in the system cut the compressor's lifespan within a single season. CityHandyman's master connects a vacuum pump and holds the line under vacuum until it reaches the required pressure. The gauge confirms the line's airtightness before the first start-up.
The AC technician mounts the outdoor unit with chemical anchors in aerated concrete
A standard nail anchor works loose in aerated concrete within a few months under the unit's weight. The master usually drills for a chemical anchor and reinforces the mounting point with a tie beam in new buildings. The bracket holds the outdoor unit without play or vibration.
The master sizes your AC by room area and window glazing
A panoramic window adds heat load that a small unit struggles to handle in summer heat. The master measures the room and factors in window size when choosing the BTU rating. The client gets the exact capacity for that specific room.
AC Services in Tbilisi
CityHandyman's master installs, services, and repairs air conditioners of any brand at your home.
Standard AC Installation
The master mounts the air conditioner on a wall of block, brick, or sandwich panel up to 45 cm thick. The technician runs the refrigerant line between the units along the wall, up to 3 meters, without chasing the facade.
- Line: routed along the wall, up to 3 meters
- Wall thickness: block, brick, or sandwich panel up to 45 cm
- Drainage: routed outside on a slope — condensate clears the wall
- The technician pressure-tests the system with a gauge before the first start-up
Non-Standard Installation & Line Relocation
The master extends the AC line across several floors or onto an enclosed balcony, routing it inside a wall chase for up to 15 meters between the units.
- Line length: extended up to 15 meters between units
- Wall chase: the line runs inside the wall — the facade stays clean, no cable trunking
- Refrigerant: topped up to match the extended line
- The master quotes the price after inspecting the site — the route determines the cost
AC Cleaning
The master cleans the filters and the coil without removing the unit from the wall. Dust on the coil cuts cooling power and drives up electricity use over a season.
- Filters: rinsed or replaced — the room's air gets cleaner
- Coil: cleaned on-site with a specialized solution
- Drain line: cleared — condensate drains without clogging
- The technician clears the outdoor unit of poplar fluff, leaves, and street grime
Refrigerant Recharge & Maintenance
The master recharges the air conditioner with R410A refrigerant and checks system pressure with a gauge. Full maintenance covers filter cleaning, an inspection of the electrical connections, and a check of the mounting hardware.
- Refrigerant: R410A — the standard for residential split systems in Tbilisi
- System pressure: checked with a gauge and restored to spec
- Electrical: contacts and wiring checked for overheating
- CityHandyman recommends maintenance once a year, before the season starts
AC Removal
The master removes the indoor and outdoor units when you move or replace the equipment. The master pumps the refrigerant down into the outdoor unit before disconnecting the line.
- Pump-down: refrigerant locked in the outdoor unit — no air enters the line
- Indoor unit: removed from the bracket without damaging the wall
- Outdoor unit: removed from the facade or balcony
- Removal costs the same as a standard installation
AC Repair
The master diagnoses the AC fault on-site — weak cooling, a condensate leak, noise, or random shutdowns. The master fixes most faults the same day you call.
- Weak cooling: refrigerant pressure and coil cleanliness checked
- Condensate leak: the master clears the clogged drain line or fixes the cracked pan
- Noise & vibration: mounts tightened, fan rebalanced
- Random shutdowns: control board diagnosed
How AC Installation Works
From your request to a finished job — usually in a single visit from the master
Where to Find an AC Installation Master in Tbilisi?
CityHandyman's master installs air conditioners in Tbilisi from 220 GEL — with a leak test on the system before start-up.
The technician arrives within 1–3 hours anywhere in Tbilisi.
AC Installation in Tbilisi — Turnkey
CityHandyman: 300+ air conditioners installed · vacuum-tested on every system · master arrives in 1–3 hours
Master's Qualifications & Certification
CityHandyman's masters hold official certification to handle refrigerant.
What People Ask About AC Installation
The installation price depends on the AC's power rating, the line length, and the wall type. A standard installation with a line up to 3 meters starts at 220 GEL. A longer line, a wall chase, or difficult access add to the cost — the master quotes the exact price from photos.
Standard installation runs the line up to 3 meters along the wall, with no chasing on the facade. Non-standard installation covers a line extended up to 15 meters, a wall chase, or routing the unit onto an enclosed balcony. The master quotes non-standard installation after inspecting the site.
Standard installation takes 3–4 hours on-site. The master arrives within 1–3 hours of the agreed time. Non-standard installation with a longer line can take more time — the master will warn you in advance.
CityHandyman's warranty runs up to 6 months on installation quality — the joint seals and the unit mounts. The manufacturer or the store where you bought the unit covers any factory defect in the air conditioner itself.
The technician calculates the AC's power rating from the room's area and the number of windows. Panoramic glazing adds heat load and calls for a more powerful unit. The master runs the exact calculation from photos and room measurements before installation.
Vacuuming removes air and moisture from the AC line before start-up. Skipped vacuuming lets moisture mix with the refrigerant and wrecks the compressor within one or two seasons. CityHandyman's technician vacuums the line on every installation and checks it for leaks with a gauge.
The outdoor unit can go on the facade through a non-standard installation with an extended line. The technician runs the line up to 15 meters and chases it into the wall when needed. The master picks the placement after inspecting the walls and facade.
Yes, CityHandyman mounts air conditioners on aerated concrete walls. The master uses fasteners rated for lightweight, porous materials — a standard nail anchor doesn't hold the unit's weight in aerated concrete.
The technician removes the air conditioner using the pump-down method — the refrigerant stays locked in the outdoor unit. At the new location, the master reinstalls the system at the standard or non-standard installation price, depending on the line length. You can book removal and installation in one visit or split them across two dates if you move on different days.
Book AC Installation in Tbilisi
Working hours
- Mon–Sun: 9:00–21:00
- CityHandyman accepts requests 24/7 — send a photo anytime.
5.0 ★ · 149 reviews on Google
More than 140 happy clients in Tbilisi have already left five-star reviews for CityHandyman's master on Google Maps. Read reviews →
